Behringer iNuke NU4-6000 Class D 4 channel Power Amp 6000 Watts

A Flexible Amplifier for Any Live Sound Setting
When we're designing live sound systems at Sweetwater, we want to make sure every piece of gear in your system works as hard as possible. We were surprised at Behringer's iNuke NU4-6000 power amplifier, because it packs four powerful channels of amplification into a compact, flexible design. You can power two mains at 1,500 watts each, while powering your subwoofer in bridged-mono mode at 3,000 watts. Or power your mains and run two separate monitor mixes through it. However you use it, the Behringer iNuke NU4-6000 gives you lots of power in a single, compact amplifier.

Behringer iNuke NU4-6000 4-channel Power Amplifier at a Glance:
Advanced technology for reliable performance
Flexible operation makes this a smart amp for many different applications
Built-in crossover for easy system tuning
Advanced technology for reliable performance
Over the years power amp technology has constantly been evolving, and the Behringer iNuke NU4-6000 power amp incorporates some of the the newest developments available. Thanks to the revolutionary Class-D technology with "near-zero" thermal buildup, the lightweight iNuke NU4-6000 runs very cool, no need for massive heat sinks or toroid transformers. The built-in limiter offers overload protection to extend the life of your precious speakers and subs. Active crossover circuits allows you to set the amp up for full-range, or bi-amped operation sending out the lows and highs separately.

Flexible operation makes this a smart amp for many different applications
The iNuke NU4-6000 power amp sports four powerful channels, and you've got a lot of options for how you use them. You can run all four channels independently at 1,500 watts each, perfect for delivering four separate monitor mixes to the stage. Or power your mains with two channels, then bridge the other two for maximum power to your subwoofer. No matter what your system consists of, the iNuke NU4-6000 is ready to integrate with it.

Built-in crossover for easy system tuning
On the back panel of the iNuke NU4-6000 power amp you'll find a crossover switch, which makes it easy to combine a subwoofer with your main speakers. Flip the crossover switch, and you'll send low frequencies to your sub while sending mids and highs to your mains. Not only do you maximize power efficiency, you'll get powerful and well-defined sound fast without having to tweak additional speaker-management processors.

Behringer iNuke NU4-6000 4-channel Power Amplifier Features:
Four-channel Class D power amp delivers 4 x 1,500W (2 ohms) or 2 x 3,000W (4 ohms)
Built-in switchable crossover makes it easy to combine main speakers with subwoofers
Detented and illuminated gain controls for precise level setting
Switch-mode power supply provides noise-free audio and exceptional transient response
Built-in limiters provide reliable overload protection to protect your speakers
Power your show with the Behringer iNuke NU4-6000!

Tech Specs
Number of Channels    4
Power Class    Class D
Watts/Side @ 8 ohms    4 x 440 W
Watts/Side @ 4 ohms    4 x 860W
Watts/Side @ 2 ohms    4 x 1600W
Watts Bridged    2 x 3000W at 4 ohms
Cooling System    Variable-speed fan
Inputs    4 x XLR/TRS combo
Outputs    4 x speakON
Rack Spaces    2U
Height    3.7"
Depth    12.2"
Width    19"
Weight    12.4 lbs.
Manufacturer Part Number    NU46000

Behringer iNuke NU4-6000 Class D 4 channel Power Amp 6000 Watts
Click To Enlarge
  • Item #: NU-6000
  • Condition: New
  * Marked fields are required.
Qty*
Price $349.99